back

News Detail

menu

What Is The Order Of The Operation Of The Scraper Winch?

Time:2018-08-17
1. Close the power switch and turn on the operating power.

2. Test run. Release the working reel and the empty reel handle at the same time, press the start button, the motor starts running for 1~2min, and observe whether the operation is normal.

3. Load operation: The control handle of the work reel (right side, on the motor side) is braked, and the handle of the empty reel (right side) is released, and the electric load is operated.

4. Parking: After the mine is over, place the bucket in a safe place. The two operating handles are released, press the stop button, the motor stops, pull down the power switch, and cut off the power.