back

News Detail

menu

What Is The Operation Process Of Scraper Winch

Time:2022-09-15

1. Start the motor and the transmission gear starts to run. At this time, the brake belt on the reel is braked, and the brake lever on the large gear should be released, so that the reel does not rotate, only the large internal gear rotates.

2. To start the reel, the brake belt on the roll must be completely loosened, and the brake belt on the large internal gear must be tightened. At this time, the reel rotates and wraps the wire rope for work.

3. During the working process of the scraper winch, if you want to temporarily stop the winch, you should loosen the brake belt on the upper wheel of the large inner wheel, and tighten the brake belt on the drum.

4. When the scraper winch adjusts the position of the towed load by micro-programming, it is only necessary to alternately lift or press the left and right brake levers to stop the rotation between the reels. When operating the brake lever, attention should be paid to the protection of the shoulder pins, joint bolts and backing plates. If the parking time is long, the brake belt should be braked and the motor should be turned off.

5. The start and stop of the scraper winch reel must be rapid to reduce the wear of the brake belt, but it is not allowed to drive or stop abruptly to prevent damage to the transmission parts.