JS 37T Automatic Steel Rebar Tying Tool is used for building market, including civil building, floor pipe, heating floor mesh,steel bar,etc. JS 37T Automatic Steel Rebar Tying Tool can save 3-5tims time than manpower by hand, and is a hand held machine used to pack rebars quickly. It is a miniature motor tool has the trait of safety and credibility, reasonable structure, advanced craft, simple;and convenient operation, high efficiency and convenient maintenance.
JS 37T Automatic Steel Rebar Tying Tool is made up of the main body, wire reel, battery pack, charger, it is inexpensive but useful tool.
Pliers mouth's largest bound diameter is 39.5 mm and Wire coil wire is 0.8 mm vacuum annealing wire and galvanized wire, Each coil wire length is about 95 metres Pliers mouth's largest bound diameter is 39.5 mm and Wire coil wire is 0.8 mm vacuum annealing wire and galvanized wire, Each coil wire length is about 95 metres All the binding steps finish inside of the machine with 9.6V safe voltage, which can not cause injury to people.
Model |
JS-37T |
Machine size |
270 mm * 65 mm * 195 mm |
The machine weighs |
970g |
Battery type |
lithium ion batteries |
Battery charging time |
quick charge 40 minutes, 1.5 hours slow filling |
Rated voltage |
10.8V |
Applicable scope of steel strapping |
8 mm - 34 mm |
Coil wire diameter |
0.8mm |
coil wire length |
more than 110 m |
Knot wire length |
40 cm and above |
Knot the required time |
0.8 seconds at a time |
Knot number per charge |
1000 times |
Each machine distribution battery number |
1 (2) or optional |
Each machine delivery charger number |
1 |
Your Name
Email or inquiry@chinacoalintl.com
Tel/Wechat/Whatsapp or +8615376502861
Country
Enquiry