News Detail
Line marking paint, also known as specification for line marking paint for road traffic, road marking paint reflective materials can also guide the driver at night. Development of line-mark coatings in China began in the 1970 of the 20th century, with the development of transportation, highway construction increased demand for road line marking is also increasing. Therefore, road line marking paint not only with scientific and economic value, but also has broad application prospects. Requirements for road line marking paint first is weathering resistance, vehicle impact, followed by short drying time and high visibility. Following is some issues of road line marking paint reflective effects:
1..Busy road traffic causing glass beads wear, tear, loss and reducing the reflective effect.
Solution:
Premixed glass beads can be used to road line marking paint to solve the problem. When the marking surface wear over time, the premixed glass beads which inside the road line markings will slowly exposed to the surface, continue to enhance the reflective effect.
2. uneven pavement.
Solution:
Find an experienced mechanic to do the job.
The mechianic must establishes first-class technological consultant and design center of road construction project, which is equipped with the full-time and part-time technical consulting and design team, many professional road construction teams, years of extensive design and construction experience, and thousands of road construction solutions.
3. poor quality of glass beads.
Too many impurities, not round, poor size distribution, paint liquidity does not meet the technical requirements, insufficient viscosity, low soft point and some other quality problems of glass beads will cause poor night reflective effect.
Solution:
Penny wise, pound foolish. Do not be tempted by too cheap prices.