News Detail
Rubber paver machine hydraulic system oil temperature is too high will reduce the viscosity of the oil, increase the leakage, lubrication parts of the oil film damage, make the wear of components aggravated; At the same time, high temperature will also make rubber and other materials made of sealing gasket premature aging and damage. Therefore, it is very important to control the appropriate oil temperature. When the oil temperature is too high, it must be stopped for inspection, which can be started from the following aspects:
(1) Check whether the liquid level of the oil tank of Rubber Paver Machine is too low. Experience shows that the high oil temperature is often caused by the lack of oil in the tank, so the lack of oil should be replenished in time.
(2) Whether the hydraulic oil filter element and the loop are blocked.
(3) Rubber Paver machine radiator is normal. If THE radiator adhered to a lot of dust, can bring about heat dissipation is bad, make oil temperature rises tall. Because paver work environment more dust, so the radiator should be cleaned in time.
(4) Whether the quality of hydraulic oil is qualified. If the quality of the added oil is not qualified, the system oil temperature will also be too high.
In addition, the hydraulic system in the lack of oil work, easy to cause damage to the pump and motor, so the lack of oil fault after checking the pump and motor running state, if necessary to replace the pump and motor damaged parts.