back

News Detail

menu

How To Use The Mortar Spraying Machine

Time:2022-08-23

1. Connect the mortar spraying machine to the power supply, start the main motor inching, test the forward and reverse rotation, and rotate in the direction of the arrow. Pay attention to jog start, that is, shut down as soon as it is turned on. It is strictly forbidden to reverse or idle the machine for a long time.

2. Install the shotcrete pipe to the mortar spraying machine, add water to the hopper, start the machine, and lubricate the pipe with water.

3. Add material to the hopper of the mortar spraying machine, pull the other end of the sandblasting pipe into the hopper, let the machine circulate the material for a few minutes, then install the spray gun, connect the air pipe for spraying, stop for more than 20 minutes, and let the machine circulate and discharge to prevent the sand from depositing and blocking the pipeline.

4. Clean the mortar spraying machine after use, directly add water to the hopper of the machine, turn on the machine to draw water until clear water flows out. After cleaning, it is best to use pure grout for the first time every day to prevent the sand remaining in the pipeline from clogging the pipeline.

The new generation of shotcrete transporter solves the shortcomings of "low efficiency, high energy consumption, high resilience, and high pollution". Not only that, the automation system is more convenient to operate, and can move forward and backward freely in engineering operations, thus avoiding the inconvenience and wasted time of lifting with a loader.

How To Use The Mortar Spraying Machine