(1) Clean the Rubber Paver Machine: remove the mud, sticky sand and asphalt accumulated on the surface of the Rubber Paver Machine; remove the dust and grease on the surface of the engine, hydraulic components and other components. Be careful not to get dirt into each fuel filler port and air filter.
(2) Check the nozzles, connecting pipes, gas tanks and switches of the heating system.
(3) Check the connection and tightening of various parts of the Rubber Paver Machine, especially whether the connecting bolts of the left and right track beams and the frame, screed, distribution device and scraper conveying device are loose or broken, and tighten them if necessary or replace.
(4) Check and rule out the leakage of various parts.
(5) Check the quantity of engine oil, fuel oil, coolant and hydraulic oil, and add new oil to the oil mark as required.
(6) Check whether the grease in the centralized lubrication device is appropriate.
(7) Check whether the blades of the screw distribution device are cracked, and if so, replace them.
(8) Check whether the electrical plugs are loose.