News Detail
The process of parking the scraper winch is also very important. For this issue, the editor summarized a few points to note when parking the scraper winch. I hope this artical can help you really know the scraper wich parking process,after you reading it.
(1) Stop the scraper winch in a safe place where there is no turquoise, no drip, no patio collapse, and no blasting operation;
(2) Reset the joysticks of the scraper winch, lower the boom to the bottom, turn the bucket down and touch the ground;
(3) Put the parking lock of the scraper winch to the locked position;
(4) Turn off the power switch and main power switch on the car. Park the rock loader on flat ground. If it is parked on a slope, wedge the wheels with triangles or stones;
(5) Drag the scraper winch. In addition to the normal towing or drawbar, a safety chain or steel wire rope must be added. When driving for a long distance, the drive system must be disconnected.
Scraper winch is a kind of equipment suitable for loading in horizontal and inclined roadways. The rake bucket rock loader can be used not only in flat roads, but also in inclined roads with inclination angles less than 30 degrees, or roadways with turning and turning angles of 90 degrees It can be used in parallel, and it can also perform the parallel operation of the driving process at the same time, which improves the driving speed. In addition, it is more suitable for various metal mines, non-metal mines, coal mines, railway culverts, water conservancy and other construction projects.
The scraper winch is mainly transmitted to the drum by a motor through a coupling, a spherical worm drive, a closed gear drive, and a spur gear drive. Inside it is mainly supported by rolling bearings, and the base is made of welded steel with symmetrical structure. The production process is simple and the operation is relatively stable. The explosion-proof system is installed inside the equipment to ensure the operator's performance and the switch handling is very simple.