back

News Detail

menu

Why Is It Forbidden Inclined To Use A Small Crane For Operation

Time:2020-02-17

When using the small crane for lifting operation, we need to understand the rules and regulations of the small crane in advance, which again and again emphasize the prohibition of inclined lifting. It is always said that the inclined crane will affect the safety, but most people are not familiar with the reasons.

In this section, we will analyze why inclined hoisting is prohibited for small cranes and other lifting equipment, which will provide a basis for us to understand the small cranes and other equipment in a deeper way, and also better ensure that the small cranes play an important role in lifting operation.

Small crane

1.Inclined crane may exceed the rated load of small crane.

If the vertical lifting state of the small crane is full load when lifting heavy objects, the inclined crane will be overloaded, and even the steel wire rope will be pulled off, the heavy objects will fall and other safety accidents will occur.

2. Inclined crane produces inertia force, endangering people around.

If the heavy object is inclined, the center of the heavy object will swing to the vertical center at the moment when it leaves the ground. At this time, it is likely to collide with the hanging of the heavy object and the surrounding staff or other objects, causing safety accidents.

Therefore, when using small crane and other lifting equipment, it is forbidden to pull and tilt the crane. Only by avoiding the above, can the equipment operate safely, reduce the occurrence of accidents and ensure the lifting safety of heavy objects.